User manual

FIBRE-to-SAS/SATA RAID SUBSYSTEM
128
User Manual
e-mail settings, and enter in the “Password” and “Re-enter Password” test
boxes the password of the user who will authenticate the e-mail settings.
4. Select the type of alerts that will be sent via e-mail.
5. Click “Save” to apply the changes to the controller, or click “Save & Test” to apply
the changes to the controller and send a test message.
This screen contains the following details and options:
Field Description
Enable Tick the check box to enable SMTP.
SMTP Server IP
Mail server where the SMTP account was created. The server name
can be used if a valid Primary DNS or Alternate DNS is entered in the
IP Connection screen.
SMTP Server
Domain
The Domain of the mail server where the SMTP account was created.
The server name can be used if a valid Primary DNS or Alternate
DNS is entered in the ‘Ethernet Configuration’ screen.
Sender
E-mail address of the system sending the e-mail, i.e. the e-mail
address assigned to the account used to administer the application.
Recipient 1 E-mail address of the first person receiving the e-mail.
Recipient 2 E-mail address of a second person receiving the e-mail.
Subject Text that will be displayed in the subject field of an Alert e-mail.
Enable
Authentication
The mail server may require SMTP authentication. It is used as a
security mechanism to prevent members of an ISP from spamming
mailboxes on the network. If the check box is selected then this
option is enabled and a user name and password are required to
authenticate the SMTP configuration.
Authentication
User
Enter the username of the user who will authenticate the e-mail
settings.
Password
Enter the password of the user who will authenticate the e-mail
settings.
Re-enter
Password
Re-enter the password of the user who will authenticate the e-mail
settings.
Application
Alerts
Alerts generated by the GUI will be sent via e-mail when they occur.
Notification
Alerts
Information events in the Event Log will be sent via e-mail when
they occur.
Warning Alerts
Warning events in the Event Log will be sent via e-mail client when
they occur.