User manual

FIBRE-to-SAS/SATA RAID SUBSYSTEM
User Manual
125
9.3 Ethernet Configuration
The Administration ÎEthernet Configuration screen allows you to view and
change the IP connection settings of the system.
Steps to configure Ethernet:
1. On the Administration Æ Ethernet Configuration screen, configure the
system whether to use DHCP or not. If not, configure the IP Address, Net
Mask, Primary DNS, Alternate DNS, Gateway IP Address, and Domain as
necessary.
2. Click “Save” to save the IP connection information of the
selected controller. The screen can be updated with the “Refresh
Page” button.