Installation guide

select Create New Partition in the pop-up menu. When the Partition

Wizard appears, select Primary Partition and click on Next. You will

see a default value for the Drive; click Next. You will then see a drive

letter (you can change this drive letter if you wish); click Next. You

will then be asked to format the Drive.

Q: Do you have “DOS Driver” for the Drive?

A: No.

Q: Can you make the External Hard Drive bootable?

A: This depends on your computer’s BIOS (Basic Input/Output

System). The BIOS contains code required to control a number

of miscellaneous functions. Please check with your computer

manufacturer for BIOS updates to determine if your computer’s BIOS

supports this feature.

Q: After I connected the Drive to my PC, I got the following alert

message: HI-SPEED USB Device Plugged into non-HI-SPEED USB

Hub.” What does this mean?

A: Windows 2000 and XP users will get this alert message if you

plugged the Drive into a USB port that only supports USB 1.1. This

is fine, except your Drive will operate USB 1.1 speeds.

If an issue cannot resolved by using our FAQ, please contact

Technical Support via the Fantom Drives support site at http://