Installation guide

21
(4) Select “Protocol” item on the Select Network Component Type window.
After that, click “Add” button.
(5) Select “Microsoft” item on the left side of Select Network Protocol window.
After that, select “TCP/IP” protocol on the Network Protocols block and click
“OK” button.
(6) Select the “TCP/IP” component in the Configuration tab of the Network
window. Click “Properties” button.
(7) The screen will show up the TCP/IP Properties window then start the
setting. First of all, you need to choose the IP address is dynamically
assigned by a DHCP server or fixed.