Portable Media Storage User Manual

RAIDBank5 Owner’s Manual

Logical Drive A logical drive is comprised of spaces from one or more physical disks and

presented to the operating system as if it were one disk.

Logical Unit (LUN) a SCSI protocol entity which may be addressed by the actual input/output

(I/O) operations of a Logical Drive. Each SCSI-type target provides one or more logical units.

Native Command Queuing (NCQ) a technology designed to increase performance of SATA

hard disks by allowing the disk firmware to internally optimise the order in which read and

write commands are executed. This can result in increased performance for workloads where

multiple simultaneous read/write requests are outstanding, which occurs most often in server-

type applications.

Online Capacity Expansion The ability to add space to an existing RAID array within a

session while preserving the RAID type and data within the array is known as online capacity

expansion. The availability of this feature enables the user to add space to a RAID array as and

when required without rebooting, thereby obviating the need for precise forecasts of capacity

requirements for the future.

Parity A mathematical function that serves as a method for error verification and correction.

In strict technical terms the parity of a group is set to 1 if the number of bits in the group that

are set to 1 is odd, and 0 otherwise. For instance, the parity of N bytes of data is obtained by

determining the number of ith bits in the N bytes that are set to 1. If that number is odd, then

the ith bit of the result is set to 1. This may sound complicated, but in reality the result can

be obtained by simply evaluating the XOR of the N bytes. Parity allows one error in a group

(of bytes) to be corrected.

Parity Group Complex RAID types such as RAID 10 or RAID 50 are built using two levels

of hierarchy. For instance, consider a RAID 50. A RAID 50 array is comprised of a group of

RAID 5 arrays at the first tier. Each RAID 5 array in the first tier is used just like a hard disk

in creating a RAID 0 at the next tier. The result is a RAID 50. In this example, each RAID 5

array at the first tier is denoted as a parity group. Each parity group is self-contained in the

sense that it is capable of withstanding a disk failure within its group and reconstructing the

data in the failed disk from parity information contained within that group.

Partition The space contributed to each array on a physical drive is referred to as a partition.

PCI An acronym for “Peripheral Component Interconnect”. It is Intel’s local bus standard

that supports up to four plug-in PCI cards per bus. Since PCs can have two or more PCI

buses, the number of PCI cards they can support are a multiple of four. The current PCI

bus implementation (version 2.2) incorporates two 64-bit slots at 66 MHz. Consequently, the

highest throughput achievable using such a bus is 528 MB/sec.

PCI Express (Peripheral Component Interconnect Express), officially abbreviated as PCIe (or

PCI-E, as it is commonly called), is a computer expansion card standard designed to replace the

older PCI, PCI-X, and AGP standards. PCIe 2.1 is the latest standard for expansion cards that

is available on mainstream personal computers. PCIe, unlike previous PC expansion standards,

is structured around point-to-point serial links, a pair of which (one in each direction) make

C-Glossary