Specifications

66
Desk Stands
Double Tabletop Microphone with integral
Desk Stand
T2 CCM 4g
This table microphone consists of two CCM 4 com pact
microphones (cardioids) rigidly attached to one another
and facing in the same direction. They can be tilted for-
ward or backward together. The second channel serves
as a fail-safe backup. The permanently attached output
cable terminates in an XLR-5M connector.
Base diameter: 80 mm
Height when extended:129 mm
Height to the top of the rotary joint: 73 mm
Cable length: 5 m
For technical specifications see pages 23 and 54.
Surface finish: matte gray (g)
Suitable windscreen: WMS
Miniature Table Stand
TCg, TC 2g
– adjustable angle
These elegant table stands, with vibration-isolating
base, can be placed unob trusively. The vertical rod is
removable, allowing the microphone to be mounted
on the base close to the mounting surface.
A neat cable run is obtained when the cable is put
into the wire loop between the bolt and the socket.
Dimensions: base diameter: 57 mm
height: 80 mm
Surface: matte gray (g)
Heavy Table Stand
T 5g
– solid metal
– with 3/8" threaded stud, e.g. for STR support rods
Dimensions: diameter: 129 mm, height: 52 mm
Weight: 1.5 kg
Surface finish: matte gray (g)
CMC 6 Ug microphone amplifier, pg. 32
SG 20 stand clamp, pg. 56
T 5g heavy table stand
MK _ microphone capsule(s)
KC (pg. 45) or KCY Active Cable (pg. 43)
CMC 6 Ug microphone amplifier
(not shown), pg. 32
or
CCM _L / U compact microphones, pg. 50 ff.
TC table stand
COLETTE
modular
CCM
compact
COLETTE
modular
CCM
compact