Specifications

64
Table Mounting
AF 1 beneath the
table surface
3. Like variant 2, but because of the weight increase
caused by the GVC, the stiffer version of the A 20 elas-
tic suspension should be used.
4. Simple mounting and more restrictive grip than
with variant 3.
Further ways of mounting microphones on a
table with elastic suspension
1. Simple mounting and a relatively restrictive grip.
A 20 S
Variant 1:
Variant 2:
Variant 3:
Variant 4:
CCM _L or CCM _U compact microphone
or MK _ microphone capsule + KC cable
SGC miniature stand mount with swivel, pg. 56
STR-TC vertical support rod, pg. 116
ST 20-3/8 mounting cylinder, pg. 116
AF 1 flanged mounting adapter, pg. 116
MK _ microphone capsule
GVC capsule swivel, pg. 45
CMC 6 Ug microphone amplifier, pg. 32
AF 1 flanged mounting adapter, pg. 116
CCM _L or CCM _U compact microphone
or MK _ microphone capsule + KC cable
SGC miniature stand mount with swivel, pg. 56
STR-TC vertical support rod, pg. 116
ST 20-3/8 mounting cylinder, pg. 116
A 20 S elastic suspension, pg. 57
F 5g table mounting flange, pg. 117
MK _ microphone capsule
GVC capsule swivel, pg. 45
CMC 6 Ug microphone amplifier, pg. 32
A 20 S elastic suspension, pg. 57
F 5g table mounting flange, pg. 117
Double Tabletop Microphone
C2 CCM 4 Ug
This table microphone consists of two CCM 4 com pact
microphones (cardioids) rigidly attached to one another
and facing in the same direction. They can be tilted
forward or backward together. The second chan nel
serves as a fail-safe backup.
For technical specifica tions see pages 23 and 54.
Suitable windscreen: WMS
Output connector: XLR-5M
Surface finish: matte gray (g)
XLR-5M
AF 1 above the table
surface
C2 CCM 4 Ug in AF 1
flanged mounting
adapter with internal
shock mount
2. Very good isolation from solid-borne noise, and ele-
gant appearance due to the smaller opening required
in the table top.
SGC
AF 1
notch
hole
STR-TC
ST 20-3/8
F 5g
COLETTE
modular
CCM
compact
COLETTE
modular
CCM
compact
COLETTE
modular
COLETTE
modular
CCM
compact