Specifications

62
Table Mounting
Gooseneck with Cable
S 250 L5Ug
– length: 250 mm
– permanently attached cable, 5 m long
– with 3/8" internal thread
– output connector: XLR-3M
The cable can be brought out from the side of the
gooseneck or, after resoldering the connector, from
the center of the gooseneck on through the AF 1 (unit
is delivered with cable exiting from the side).
Surface finish: matte gray (g)
Gooseneck with XLR-3M
S 250 LUg
Like S 250 L5Ug, but with an XLR-3M plug at the bot-
tom end instead of the cable.
Straight Extension Tube with two Swivels
RLG 350 Ug
– elegant table tube for CCM _L
– swivel joints at both ends of the tube
– tube length: 350 mm
Special versions (e.g. with permanently attached out-
put cable) are available on request.
If the tube rod must be tilted at a 45° angle or greater
or if greater extension is required for either part of the
setup, two AF 1 adapters should be mounted one
above the other, with the the cylindrical lower part of
the RLG 350 inserted into the upper AF 1 while the
XLR plug rests in the lower one.
Surface finish: matte gray (g)
Output connector: XLR-3M
CCM _L compact microphone
S 250 L5Ug gooseneck
ST 20-3/8 mounting cylinder, pg. 116
AF 1 flanged mounting adapter pg. 116
5 m cable
with XLR-3M
CCM _L compact microphone
RLG 350Ug straight extension tube
1 or 2 × AF 1 flanged mounting
adapter, pg. 116
CCM _L compact microphone
S 250 LUg gooseneck
AF 1 table mount elastic suspension,
pg. 116
CCM
compact
CCM
compact
CCM
compact