Specifications

59
Extension Tubes
Note:
Laterally-addressed capsules (MK 4V, MK 41V, MK 4VXS,
MK 6 and MK 8) can be used on the RC with a small
elastic ring which we will supply at no extra charge. This
ring should be slipped over the threads of the RC so
that the capsule can be aimed in the desired direction.
MK _ microphone capsule
RC 1200g Active Extension Tube
CMC 6 Ug microphone amplifier,
pg. 32 or M 222, pg. 36
STR 350g vertical support rod, pg. 116
BF 250 floor stand, pg. 118
Straight Extension Tube
RL
– extension tube for CCM _L COMPACT CONDENSER
MICROPHONES
– at the front end: Lemo socket; at the output: Lemo
plug for the existing adapter cable of the CCM _L
– the swivel at the front end can be set from 0° (fully
extended) to 120°
Standard lengths etc. just as with the RC tubes.
The K 5 LU adapter cable is included with the CCM _L,
while the RG 8 swivel is included with the RL straight
extension tube.
Recommended popscreens: B 1 D or B 5 D
CCM _L compact microphone
RL 700g straight extension tube
STR 350g vertical support rod, pg. 116
BF 250 floor stand, pg. 118
COLETTE
modular
CCM
compact
Active Extension Tube
RC
Active Extension Tubes are used between a Colette-
series microphone's capsule and amplifier. This provides
an unobtrusive way to place a microphone capsule
directly in front of a vocalist or announcer without
blocking anyone's view. This type of extension tube
has become the standard for miking orchestras in tele-
vision and video productions.
The RG 8 swivel clamps the Colette tube onto a ver-
tical support rod, allowing adjustment of the tube's
height and angle. The angle of the capsule relative to
the tube is adjustable independently from 0° (fully
extended) to 120°. This gives the Colette tube a very
wide range of applications.
Standard lengths:
RC 350g: 350 mm; recommended stand base (if the
STR vertical support rod is fairly short): T 5g
RC 700g: 700 mm; recommended stand base: BF 250
RC 1200g: 1200 mm; stand base: BF 250
Special lengths of less than 1200 mm can also be
ordered.
Diameter of tube: 8 mm
Surface finish: matte gray (g). Other surface finishes
available on request.
Accessory (included): swivel joint RG 8
Recommended popcreens: B 1 D or B 5 D
RC with B 5 D
close-speech
guard
RC with B 1 D
pop filter