Specifications

48
THE Compact System
CCM
compact
COMPACT MICROPHONES
CCM-L, CCM-U
– compact
– balanced output (Lemo / XLR-3M) as in the Colette
modular series microphones (CMC)
– for 12 / 48 V phantom powering
– suitable for use with very long cables (up to ca.
300 meters, depending on the cable materials)
The CCM series offers a simpler alternative to the
Colette series when there is no need to exchange cap-
sules on a single amplifier. The capsules are identical
to those of the Colette series, but each is built together
with a highly miniaturized amplifier circuit into a single,
inseparable unit. A CCM thus resembles a Colette-
series capsule on the end of an Active Cable, but its
output is a balanced, low-impedance signal which can
be directly connected to a preamp, mixer input or
recorder with 12 or 48-Volt phantom powering.
Two general varieties are offered. In the CCM _U
type, a robust XLR cable is permanently attached to
the micro phone. The CCM _L type has a thinner,
detachable XLR cable with a Lemo plug at the micro-
phone end, which allows the use of certain special
accessories that resemble Active Accessories of the
Colette series.
The two general types:
CCM-L: The thin, removable connecting cable is sturdy
and reliable. It terminates in an XLR-3 plug and fea-
tures a miniature Lemo connector with a threaded
collar, so that when it is connected to the microphone,
nothing can rattle
CCM-U: special version which is lighter and 7 mm
shorter; the XLR cable is heavier-duty and perma-
nently connected to the microphone
Accessories (included):
polished wood case, SGC miniature stand
mount with swivel (see on the right);
CCM L: K 5 LU adapter cable (Lemo / XLR-3M),
5 m long
Technical specifications: see page 54
CCM _L compact microphone, e.g. CCM 4Lg (cardioid)
RL 1200g straight extension tube (RG 8 swivel included), pg. 59
STR 350g support rod, pg. 116
BF 250 floor stand, pg. 118
SGC
CCM _L
CCM _U
(special version)
XLR-3M