Specifications

125
Windscreens and Popscreens
Basket Windscreens
WSR MS, WSR MS CI, WSR MS LI, WSR MS LU
(see miniature stereo on pages 82 and 90)
This is the most effective windscreen that we offer.
It can be used with one or a pair of microphone cap-
sules on KC Active Cables, or CCM _L or CCM_U com-
pact microphones.
It contains an AMS double elastic suspension for
M/S stereo recording.
The following versions are available:
WJ MS/XY
Windjammer;
fur-like “overcoat”
which enhances the
suppression of wind
noise
WSR MS: without cable
WSR MS CI: for microphone capsules,
with KCY 115/ 0,25 Ig Y-cable; special miniature
output plug for VMS 5 U microphone preamplifier
or VST 62 IUg stereo microphone amplifier
WSR MS LI: for CCM _L microphones,
with KLY 115/0,25 I Y-cable
input connector: Lemo; output connector: female
miniature Binder
extension: KS 5 I (5 m long)
WSR MS LU: with KLY 115/0,25 SU Y-cable;
input connector: Lemo; output connector: XLR-5M
The microphone side of the above Y-cables is 115 mm
long; the output side is 250 mm.
cable in WSR MS CI
2 × 115 mm
250 mm
cable in WSR MS LI
cable in WSR MS LU
COLETTE
modular
CCM
compact
Hollow Foam-Type Windscreens
Hollow Foam Popscreen B 5 D
Application: for use especially on pressure-gradient
transducers in light wind and as a close-speech guard.
The B 5 D offers good effectiveness, yet has only a
slight influence on the sound. The microphone must
be inserted up to the stop.
Although it has not been designed for that purpose,
it is possible to use it on the MK 4V, MK 41V or
MK 4VXS microphone capsules and the corresponding
CCM C
OMPACT CONDENSER MICROPHONES. The microphone’s
slight inherent high-frequency emphasis is then com-
pensated for.
The B 5 D cannot be used with MK 6 or MK 8 cap-
sules, or the corresponding CCM compact micro phones.
Dimensions: 70 mm x diameter 50 mm (max.)
Color: gray, with additional gray, porous velvet-like
surface treatment