Specifications

122
PR 120 S and PR 120 SV
These popscreens are a patented product of Ton studio
Pauly. They guard against the popping noise generated
by plosives such as “P” and “T” during close-miking.
The popping noise is caused by an airstream which
accompanies these consonants. The PR 120 S damps
this stream with two layers of a lightweight fabric
attached to a rugged aluminum frame.
Mounting is accomplished simply by clipping this unit
onto the microphone body.
Despite its high effectiveness, the PR 120 S has no
audible effect on the sonic impression.
Dimensions: diameter: 120 mm, height: 11 mm
The surface is gray / matte gray.
PR 120 S
SG 20
PR 120 SV
A 20 S
Popscreen B 1 D
The B 1 D is a highly effective popscreen with a decep-
tively simple outward appearance. As with the B 5 D
and the basket-type windscreens, the sound inlets of
the microphone are enclosed by a volume of air.
The B 1 D is most effective in the axial direction;
thus we offer it as a popscreen rather than a wind-
screen. It is designed exclusively for axially-addressed
capsules such as the MK 4, MK 41 and their CCM
counterparts, rather than for the MK 6, MK 8, or any
capsule or CCM with a “V” in its name.
It is as effective as the distinctly larger B 5 D, but as
one might expect, it also has slightly more of an effect
on sound quality.
Dimensions: 32 mm diameter × 59 mm
Color: gray
Capsule Guard
B 1
Thin foam covering for a CCM or Colette capsule,
especially suitable for protecting a capsule from rosin
dust when attached to a string instrument (e.g. with
the VA 1 violin mount).
Dimensions: 28 mm diameter × 41mm
Color: Anthracite
Popscreens
Foam-Type Windscreens
Windscreens and Popscreens
New!