Instruction manual

Standard Transmitter Cables – 4 pin Hirose

FOR TX716

Dynamic Microphone Cable

• DM-MHR4 (Dynamic microphone input adapter cable)

• DM-MHR4T (Dynamic microphone input adapter cable with in-line transformer to give 12dB gain)

Condenser AB Powering Cable

• T12-MHR4 (T-Powering adapter cable)

• P12-MHR4 (12V low voltage condenser microphone powering cable)

• P48 MHR4 (In-line DC to DC booster cable, for 48V phantom power microphones)

Line Input With External Powering

• TL20CF-MHR4 (Line input adapter cable)

• TLP07CF-MHR4 (Line input and external powering adapter cable)

Note: All ‘TLP’ cables have in-line dc-dc regulators and dc filtering.

For best results, the following Electret Microphones are recommended:

• KAT66 (pins 3+4 link to Red and Pins 1+2 link to Screen and Black)

• Countryman EMW (pins 3+4 link to Red and Pins 1+2 link to Screen and Green)

• COS 11 (pins 3+4 link to Black and Pins 1+2 link to Screen and White)

• DPA 4060 (pins3+4 link to Inner and Pins 1+2 link to Screen)

• ECM 77 (pins 3+4 link to Red and Pins 1+2 link to Screen and White)

• MKE 2 (pins 3+4 link to Red and Pins 1+2 link to Blue and Screen)

Any other brand of electret microphone may be used.