Instruction manual

Standard Transmitter Cables – 6 pin LEMO

FOR TX716A, TX7256, TX700B

Dynamic Microphone Cable

• TDN15CF-6 (Dynamic Microphone Cable)

• TDN15CF-6T (Dynamic Microphone Cable, with in-line Transformer)

Condenser AB Powering Cable

• T12 MICRON-6 (Condenser AB Powering Cable)

• P12 MICRON-6 (Low Voltage 12V Phantom Powering Cable)

• P48 MICRON-6 (Phantom Powering 48V)

Line Input With External Powering

• TL20CF-6 (Line Input Cable)

• TLPO7CF-6 (Line Input With External Powering Cable -Y Cable)

• 2TLPO7CF-6 (Double Line Input with External Powering - Y Cable)

Note: All ‘TLP’ cables have in-line dc-dc regulators and dc filtering.

For best results, the following Electret Microphones are recommended:

• KAT66 (pins1+6 link to Red and Pins 4+5 link to Screen and Black)

• Countryman EMW (pins1+6 link to Red and Pins 4+5 link to Screen and Green)

• COS 11 (pins1+6 link to Black and Pins 4+5 link to Screen and White)

• DPA 4060 (pins1+6 link to Inner and Pins 4+5 link to Screen)

• ECM 77 (pins1+6 link to Red and Pins 4+5 link to Screen and White)

• MKE 2 (pins1+6 link to Red and Pins 4+5 link to Blue and Screen)

Any other brand of electret microphone may be used.