Instruction manual

How to Get the Best from Explorer
FULLY AUTOMATIC
This procedure is for News reporting, interviews and other situations where there is no opportunity for
rehearsal with the talent. The objective is to preset the audio gain slightly high and allow the limiter to
control the level.
Speak in an average to quiet voice with the microphone in a realistic position, while adjusting the SET LEVEL
control, so the AF PEAK LED flashes regularly (for any electret microphones the setting will be
Level 6 or 7).
TX is now ready to use.
LOW MODULATION LEVEL
This procedure is for those situations where the dynamic balance of the dialogue must not be altered at
all, such as Theatre Musicals or for stereo productions. In this mode the automatic levelling threshold is
set to be above the highest expected input level.
Adjust SET LEVEL control, while performer speaks at normal level, so the AF PEAK LED NEVER flashes at
all. For Musicals, it may be preferable to adjust the SET LEVEL control on the loudest passage so the AF
PEAK LED does not flash. (For any electret microphones the setting will be Level 0 or 1)
TX is now ready to use.