Instruction manual

Powering
External Powering
(A) RECEIVERS
External Powering from 7.5 - 16V dc can be supplied by a separate mains unit or from the camera, mixer
or tape recorder batteries, providing they are not +ve earth. Always use recommended MICRON
combinational cables (these cables are fitted with in-line dc-dc regulator and additional filtering).
For powering through the 4-pin Hirose connector, a combination lead is required e.g. AOCPH-HR4
(B) TRANSMITTERS
It is recommended that external power only be applied via a MICRON TLP lead, as this lead includes a 9V
voltage regulator and dc filtering. For powering through the 4-pin Hirose connector or the 6-pin Lemo
connector a combinational lead is required e.g.TLP07CF-6 or TLP07CF-MHR4
It is recommended that the internal batteries be removed when the unit is externally powered. Alkaline and
lithium batteries are the most suitable because of their long life and reliability. They have a long shelf life
and can be relied on to yield their full rated capacity. A conventional 9V transistor radio battery is NOT
recommended.
Battery Life: 6 to 7 hours continuous minimum expected.
Figures are based on a 50mW transmitter @ 25°C
Battery data is approximate, since battery capacity varies with age and ambient temperature, and
transmitter consumption varies with antenna position.