Instruction manual

Explorer 100 Transmitter Front Panel
Audio Input Socket
On transmitter models TX716A, TX7256 and TX700B, a 6-pin Lemo connector with gold plated pins is
used for the audio input. TX716 is fitted with a 4-pin Hirose connector for the audio input.
The transmitter offers many audio input options depending on the ‘Transmitter Cable’ selected.
Set Level Control
For easy set-up and repeatable gain settings an eight-position modulation level control is used.
Modulation Level and Battery Status Indicator
The audio input at limiting level is indicated as an AF Peak LED showing modulation status to enable
repeatable levels to be set (with ‘-10’ on TX700B only). Battery Status Indicator operates if the battery
voltage falls below 6.5 Volts.
Antenna Socket
A miniature professional SMA screw socket ensures long-term reliability.
Bass – Cut Switch (TX700B only)
The Bass-Cut switch provides added front-end protection, where it may be used to reduce wind noise and
counteract close microphone effects.