User's Manual

Chapter 6 Printer

6.1 External Dimensions

Dimensions (length×width×height)

120mm × 97mm × 49mm

Part Name

1. Paper Cover

2. Paper Exit

3. USB Port

4. Power Button

5. Battery Indicator

6. Mode Indicator

7. Error Indicator

8. Feed Button

9. Power Port

10. RS232 Port

6.2 Operating Procedure

1) Press the POWER button to turn on the printer.

2) Touch【WIFI】icon in the settings interface of BAM

S, then touch【Scan】icon, select the WIFI named

RG-MDP58B, touch【Connect】icon (no password needed). After the connection is successful, the WIFI logo will

appear in the upper right corner of the screen.

3) Make sure the paper has been installed. Print the data via BAM

S’s print function.

4) Press the POWER button to power off after printing is completed.

6.3 Install paper roll

To install the paper roll into the printer, pinch each end of the paper cover to open it, and insert the paper roll

(the glossy side of the paper face down). Pull out a small amount of paper, then close the cover.

In the power-on state, press the Feed button to feed the paper and release it to stop.

6.4 Specifications

Printing method

Lattice stylus printing

Printing width

48mm

Resolution

127 dpi (5 dot/mm), 240 dot/line

Printing speed

6.6 mm/sec

Paper requirements

Width: 58mm, thickness: 60-85μm