Manualshelf

User's Manual

ManualsBrandsMicron View ManualsElectronicsBioAerosol Monitoring System
12345678910
6
Chapter3 Safety Instructions
3.1 Installation
Caution
Do not use the device near ethyl alcohol, paint thinners or any other inflammable materials. If inflammable
materials come into contact with the electrical components inside the device, it could be a fire hazard.
Do not place any containers with water or liquid on the device. Shut down the device immediately when any
liquid falls into or splashes into the device. In addition, if the power cord or any cables are connected, disconnect
immediately. Unplug the power cord entirely.
Do not place the device on an unstable location (such as an unstable platform or sloped surface). Do not place
the device where is vulnerable to severe vibration. Any of these conditions can result in damage to the device or
personal injury for those nearby.
The rear exhaust ensures the proper gas path function. Blockage the exhaust could cause overheating and
malfunction, potentially creating a fire hazard.
Do not place the device on the following location, or it could be a fire hazard.
﹒Direct sunlight
﹒Locations susceptible to high temperatures.
﹒Close to any open flame.
3.2 Power supply
Caution
Do not disassemble or modify the cable.
Do not place the heavy objects on the cable. Keep the cable away from heat source. Otherwise, the insulating
layer of the cord may melt and could be an electric shock hazard or a fire hazard.
Do not stretch the cable, or it may become loose, overheating and could be a fire hazard.
The cable may be damaged if it is placed under strain. Using a damaged cable may result in accidents such as fire
or electric shock.
Do not handle the power cord or cable with wet hands, or it could be an electric shock hazard.
Do not place any items on the AC adapter. It could cause overheating and result in fire or electric shock.
Do not use an AC adapter that is not supplied by MicronView, or it could be a fire hazard.
Do not use the supply voltage out of range of AC adapter, or it could be a fire hazard or an electric shock hazard.
To unplug, always grasp the power cord. Do not stretch the cable, as it may expose the core of the cable or
damage the insulation. It may result in electric leakage, and it could be a fire hazard or an electric shock hazard.
3.3 Operation
Caution
Do not disassemble or modify the device. Exposure to the high temperature parts, mechanical parts and laser
inside the device could result in personal injuries such as burns, blindness, etc.