Specifications

15 16
E70 Series
Even with one-micron-unit commands in the machining
program, interpolation is in nanometer units. As the calculation
accuracy of a block intersection is improved, lines on the
surface is finer.
Nano Control
PLC program samples have been prepared for the basic key
layout, enabling the creation of suitable PLC programs for your
machine simply by adding interface components with
machine. Refer to the product brochure for details.
MITSUBISHI CNC Machine Operation Panel
A compact flash memory card (CF card) /USB memory
interface is located on the front of the display. In using CF
card, the card slot can be completely covered by a lid so as
to prevent foreign materials from entering (IP67).
Memory Card/USB Memory Interface
PLC Axis
Even when the control axes configuring a machine
aremounted at an angle other than 90 degrees, this
function enables it to be programmed and controlled in
the same way as with an orthogonal axis.
The inclination angle is set using a parameter, and axes
are controlled using the movement amounts of the axes
which are obtained through conversion and compensation
using this angle.
Inclined Axis Control
(Lathe System)
The spindle's constant position loop control has eliminated
the zero point return time when switching from the spindle to
C-axis.
Spindle/C-axis Control
Milling system Lathe system
0.1µm
1nm
230KB [600m]
8,000 steps
8.4-type
Sheet keys
NC Designer
Compatible
6
3
1
2
3
1
6
3
2
2
3
1
Main Specifications
Model name
Specifications
<Example of use>
When the X axis serves as the basic
axis and the Y axis serves as the
inclined axis
X: Actual X axis
Y: Actual Y axis
y: Programmed Y axis
θ: Inclination angle
Yp/cosθ
Yp×tanθ
X
Y
y
Xa
Yp
Ya
θ
θ
Interpolation calculation accuracy improved
1,000
500
0
0 500 1,000
1,500 2,000
Y(µm)
X(µm)
1,050
540
530
520
510
500
490
480
470
Y
(µm)
X(µm)
1-micrometer
1-nanometer
950 960 970 980 990 1,000 1,010 1,020 1,030 1,040
By setting the number of stations required for the
application, the drive automatically sets up equal intervals
between each station. Positioning of the axis is only possible
by commanding the station number.
Indexing function
Indexing function with magazine axis
Decelerator
17 16 15
131211
14
Indexing position
23
22
21
20
19
18
8
7
6
5
4
321
24
10
9
Servo motor
Simple CNC Offering Easy Operability and High Cost Performance
This CNC has the same screen structure as of M700V and M70V Series, allowing easy operations.
Switching between milling and lathe systems is accomplished simply by changing the parameter.
Various support tools help reduce initial setup time including the time for developing ladder programs and customized screens.
Simple operations free operators from burden
CNC control part integrated with a display provides compact size and high cost performance.
Ethernet interface is installed as standard; thus, program management can be easily realized.
Compatible with analog output, this CNC allows a spindle motor to be driven by an inverter.
With the latest hardware installed, this CNC realizes high cost performance
Maximum number of control axes (NC axes + PLC axes + spindle)
Maximum number of NC axes (in total for all the part systems)
Maximum number of spindles
Maximum number of PLC axes
Maximum number of simultaneous contour control axes
Number of
control axes
Maximum number of part systems
Least command increment
Least control increment
Maximum program capacity
Maximum PLC program capacity
Display
Keyboard
HMI customization function
MITSUBISHI CNC machine operation panel
* Maximum specifications including optional specifications are listed.
Speed Speed
Shortened
<
Our conventional series
>
<E70 series>
Time Time
Zero
point return
C-axis
positioning
C-axis
positioning
Example when combined with an 8.4-type display