Specifications

9 10
Advanced product lines take your machine to the next level
Compatible with the Mitsubishi FA integrated
solution, “iQ Platform”
High-performance CNC integrated with high-
speed PLC offers high-speed control to reduce
cycle time
A wide variety of FA products helps construct
flexible lines
iQ Platform Compatible CNC C70 Series Incorporated with
Mitsubishi's State-of-the-Art Technologies
Global Standard Mitsubishi CNC M70V Series, Pursuing High Speed and Accuracy
Enhanced machining accuracy and reduced
tact time
Easy and advanced operation contributing to
setup time reduction
Compact size
Simple CNC E70 Series, Offering Easy Operability and High Cost Performance
Simple operations free operators from burden
With the latest hardware installed, this CNC
realizes high cost performance
M700VW Series
(equipped with Windows
®
XPe)
M700VS Series
*Customized screen
High-grade Mitsubishi CNC M700V Series,
Equipped with Advanced Complete Nano Control
The latest RISC-CPU is installed to achieve
advanced complete nano control
High-accuracy machining with complete nano
control
Easy operability that significantly reduces
machining setup time
Product Line
High-performance Servo/Spindle Drive Units
MDS-D2/DH2 Series
A line of high-performance multi-hybrid drive
units are available. The multi-hybrid drive unit
drives a maximum of three servo axes and one
spindle, supporting the ownsizing of units and
offering technical advantages.
A power regeneration system that efficiently uses
energy during deceleration as power contributes
to highly-frequent acceleration/deceleration and
energy savings.
STO （safe torque off） is now available.
(Note)
Multi-hybrid Drive Units MDS-DM2 Series
Ultra-compact drive units with built-in power supplies contribute to reducing control
panel size. The 2-axis type is added for further downsizing.
High-speed optical communication enables a shorter position interpolation cycle and direct
communication between drives, promoting further high-speed and high-accuracy machining.
A high-efficiency fin and low-loss power module have enabled unit downsizing,
which also leads to a reduction in control panel size.
STO （safe torque off） is now available.
(Note)
All-in-one compact drive units MDS-DJ Series
With the fastest current control cycle, basic performance is drastically enhanced
（high-gain control）. A combination of high-speed servo motor and high-accuracy
detector helps enhance overall drive performance.
A high-efficiency fin and low-loss power module have enabled unit downsizing. A
line of drive units driving a maximum of two spindles is available, contributing to a
reduction in control panel size.
STO （safe torque off） is now available.
(Note)
High-inertia machine accuracy is ensured. Suitable
for machines requiring quick acceleration.
Range: 0.5 to 9 [kW]
Maximum speed: 4,000 or 5,000 [r/min]
Supports three types of detectors with a resolution of
260,000, 1 million or 16 million p/rev.
Suitable for an auxiliary axis that require
high-speed positioning
Range: 0.1 to 0.75[kW]
Maximum speed: 6,000 [r/min]
Supports a detector with a resolution of
260,000p/rev.
Use in clean environments is possible since no ball screws are
used and therefore contamination from grease is not an issue.
Elimination of transmission mechanisms which include backlash,
enables smooth and quiet operation even at high speeds.
Dimensions:
Length: 290 to 1,010 [mm]
Width: 120 to 240 [mm]
High-torque direct-drive combined motor with a
high-gain control system provides quick acceleration
and positioning, which makes rotation smoother.
Suitable for a rotary axis that drives a table or spindle
head.
Range:
Maximum torque: 36 to 1,280 [N·m]
Medium-inertia Motor HF Series
Linear Servo Motor LM-F Series Direct Drive Servo Motor TM-RB Series
Low-inertia Motor HF-KP Series
Spindle Motors
Drive Units
Servo Motors
Motor energy loss has been significantly reduced
by optimizing the magnetic circuit.
Product line:
Normal SJ-D Series 3.7 to 11 [kW]
Compact & light SJ-DJ Series 5.5 to 15 [kW]
High-performance New Type Spindle Motor SJ-D Series
A vast range of spindle motors is available, all ready to
support diversified machine tool needs.
Product line:
Normal SJ-V Series 0.75 to 55 [kW]
Wide-range constant output
SJ-V Series 5.5 to 18.5 [kW]
High-speed SJ-V-Z Series 2.2 to 22 [kW]
Hollow-shaft SJ-VS Series 5.5 to 18.5 [kW]
High-performance Spindle Motor SJ-V Series
Tapping machine-dedicated spindle motors have
joined the new spindle motor line SJ-D Series in an
effort to speed up drilling and tapping.
The low-inertia reduces acceleration/deceleration
time, resulting in higher productivity.
Product line:
Low-inertia SJ-DL Series 0.75 to 7.5 [kW]
Low-inertia, High-speed New Type Spindle Motor SJ-DL Series
The spindle dedicated to tapping machines requiring
faster drilling and tapping.
The low-inertia reduces acceleration/deceleration time,
resulting in higher productivity.
Product line:
Low-inertia normal SJ-VL Series 3.0 to 11 [kW]
Low-inertia hollow shaft SJ-VLS Series 3.7 to 11 [kW]
Low-inertia, High-speed Spindle Motor SJ-VL Series
Tool Spindle Motor HF-KP/HF-SP Series
Taking advantage of the characteristics of a servo motor such as smallness and
high-output, this motor serves as a compact and high-output spindle motor which is
capable of high-speed rotation （6,000r/min）. This motor contributes to downsizing
of spindles, such as the rotary tool spindle.
Product line:
Small capacity HF-KP Series 0.4 to 0.9 [kW]
Medium capacity HF-SP Series 2.2 to 4 [kW]
(Note) Please contact us for availability of STO as a whole system.
The optimized electrical design increases
the continuous rated torque per unit
volume compared to our conventional
model, contributing to downsizing of the
spindle unit.
The mold with cooling jacket is available
as an optional feature.
Built-in Spindle Motor SJ-BG Series