Specifications

17 18
User-friendly
Human Machine Interface allowing easier and more visible use
HMI for Easier and More Visible Use
Screen structure linking to the operation processes
Operation processes are divided into three steps, “Monitor”,
“Setup” and “Edit”, and necessary information is aggregated
into three screens. These screens can be displayed by touch-
ing a single button on the keyboard.
Menu customization function
Menu keys on the bottom of the screen can be freely ar-
ranged. Frequently used menu keys can be put together on
the first page.
2-part system display
The Monitor screen of the 2nd part system can be displayed
together with the 1st part system. Switching screens is not
necessary.
2-part system display
Manual/automatic backup function
Program input error warning function
Program check based on a 3D solid model
Decimal point omitted: A decimal
point has been left out of the
address data
Integration of program check
and editing functions
Operation Support
Programs are automatically created for each process when an operator selects machining process and inputs data on screen.
A tool path can be graphically drawn for the program check.
This function also supports inclined surface machining.
Guidance function
By pressing the help button, guidance (operation procedure
/parameter descriptions/alarm descriptions/G code format)
regarding the currently displayed screen will be shown.
Menu list
Menu list buttons are newly introduced. With these buttons,
the screen desired for display can be called up directly.
The selected screen’s function outline is also displayed.
Manual/Automatic backup function
NAVI LATHE (Lathe system)NAVI MILL (Machining center system)
Machining
surface view
Guidance image area
Tab selection
Large amount of information aggregated
into one screen
Machining conditions
are displayed visually
Icon menu displays
screen images
Counter display is
automatically enlarged
in the manual mode
Pop-up window
to avoid screen
switching
Visible hierarchy
with two-layer
menu display
Keyboard is displayed in the pop-up window
(for touch-panel displays)
Pop-up screens
Tabs allow the user to select necessary operations from the
operation menu, and pop-up screens allow the user to
access desired information while the original screen remains
displayed. For displays with a touch panel, a keyboard can be
displayed on the screen.
for M700V Series & M70V Series & E70 Series
Edit screen
Setup screenMonitor screen
Batch-backup of the NC data into the memory card/USB
memory inserted in the front interface of the display is pos-
sible. For the built-in hard disk type M700VW Series,
backup in the hard disk is also possible.
Data is automatically backed-up at a certain interval set by
the parameter.
Simple Programming Functions with Simple Machining Menu
NAVI MILL
(
Machining center system
)
/ NAVI LATHE
(
Lathe system
)
An operator sets the
shape of the inclined
surface to machine
The added 3D solid model check function allows more re-
alistic cutting check.
*1
This function helps an operator to input and check programs.
Errors are indicated when a decimal point is omitted.
*2
*1 Available with M700V Series, M70V TypeA (M System) only.
*2 Available with M700V Series only.
Shortcut icons to each screen
Outline of the selected
function appears
(HMI:Human Machine Interface)
* M700V Series, M70V Series only