User`s guide

Drive Image Professional Chapter Seven - Software Utilities
97
Drive Image Professional
If you want the absolute fastest way to clone workstations, a Drive Image
Professional version is available for use on multiple PCs. For more information
contact Power Quest sales at 801-226-8977 or visit their web site at
http:www.powerquest.com. For upgrades only, call PowerGuest.
N
OTE
:
The complete manual for Drive Image is available on the MRestore CD, in the
PQtools\userinfo. folder.
Drive Image System Requirements
* For Windows NT and OS/2 users, Drive Image must be run from a bootable
floppy or CD.
Creating Image Files
If you create an image on one machine and you wish to restore the image on a
machine with a different configuration (for example, a different motherboard or
video card), the operating system may not boot correctly. Therefore, we
recommend imaging and restoring to identical hardware configurations.
Any discussion of hard-disk imaging assumes that the software, including the
operating system, is being copied in accordance with the license agreement with
the software manufacturer.
Hardware/Software Minimum Recommended
Processor Intel 386SX Intel 486 above
RAM 8 MB (16MB required
for FAT 32 or NTFS)
32 MB (48 MB for FAT 32
partitions lar
g
er than 6 GB)
3.5 inch diskette drive None None
CD-ROM Any speed Any speed
Hard drive free space 5 MB 5 MB
Operatin
g
System Windows 3.x, 95/98,
NT, DOS 5.0, OS/2*
Windows 3.x, 95/98, NT,
DOS 5.0, OS/2*
Monitor VGA SVGA
Pointin
g
Device No pointin
g
device is
required to operate
Drive Ima
g
e
Microsoft mouse (or
compatible pointin
g
device)
TABLE 10. Drive Image System Requirements