User`s guide

Installing Optional Devices Chapter Six - Optional Accessories
91
10.TV Out (RCA): This connector port provides video output to a television
monitor.
11.Network Interface (RJ-45): The network interface connector is for connecting
your computer to an Ethernet 10/100 Base T network.
Port Replicator Operation
This section describes how to configure and use the port replicator with your
notebook computer. It covers:
•
Connecting your notebook computer to the port replicator
•
Disconnecting your notebook computer from the port replicator
The notebook computer connects to the 204-pin connector on the front of the port
replicator.
1. Turn off the port replicator.
2. Turn off the notebook computer power.
3. Disconnect all peripheral accessories.
4. Plug the DC adapter into the DC IN connector on the back of the port
replicator.
5. Place the port replicator in a location that is convenient for using the computer.
6. Place your notebook computer so the rear panel aligns with the Port
Replicator.
7. Locate the two position guides (holes) at the bottom edge of the Port
Replicator and align the notebook.