User`s guide

Installing Optional Devices Chapter Six - Optional Accessories
90
8. Connector Port: Connect the notebook into this 204-pin connector.
Rear Panel
The following section provides a description of the rear panel of the Port
Replicator.
1. PS/2 Ports: Theses connectors accept an external keyboard with a 6-pin (PS/
2-compatible) connector and an external IBM PS/2 compatible mouse. To
connect a keyboard with a 5-pin connector, use a 5-pin to 6-pin transfer cable
available from your dealer.
2. Parallel Port: Plug a parallel printer cable into this 25-pin female connector.
The parallel port replaces the notebook computer’s printer port when it is
docked to the replicator.
3. Serial Port: Plug a serial printer, mouse, or other serial device into this 9-pin
serial port.
4. Audio Jacks: These audio jacks allow connection of external speakers,
microphones, and other audio input signals.
5. DC-IN: Plug the DC adapter into this connector.
6. USB: The USB port is for Plug and Play connection of USB devices.
7. S-Video: The 4-pin S-Video connector is for viewing the Port Replicator’s
Video output on a television monitor that supports S-Video input signals.
8. VGA: This port is for connecting an external VGA/SVGA display monitor using
a 15-pin female connector.
9. Game Port: This 15-pin port is for connecting a joystick, game pad, or MIDI
device. (The Trek2 only supports analog joysticks.)