User`s guide

Installing Optional Devices
Chapter Six - Optional Accessories
88
Your modem is capable of data communication at rates of: 300, 1200, 2400,
4800, 9600, 14400, 19200, 28800, 38400, 57600, and 115200, 230400bps. Make
sure your Com port baud rate settings in your communications software is set to
one of the above speeds.All commands sent to the modem must being with AT
and end with ENTER. All commands may be typed in either upper or lower case,
but not mixed.
Optional Port Replicator
The port replicator is designed to give your notebook computer the expendability
and connectivity of a desktop computer, without sacrificing convenience. In
addition, the port replicator has an AC IN connector a power switch, a power
switch and an undock button. When the computer is connected to the port
replicator, the port replicator controls power to the computer (the computer’s
power switch and DC IN connector will be covered).
This chapter provides a short introduction that will familiarize you with your new
port replicator. It covers:
Important information about unpacking and handling the product.
A general overview of the system.
If there are any missing or damaged items, contact your dealer immediately. Be
sure to save the packing materials for future use in repacking and shipping.
Operating Environment
To enhance its reliability, this product must operate as intended in the face of
typical environment conditions. Our major task is to prevent equipment damage
and to minimize any malfunctions.
Leave in a place where foreign matter or moisture may enter the system
Subject to shock or vibration
Exposed to excessive heat or direct sunlight
Exposed to strong magnetic field
Features
When the notebook computer is connected to the port replicator, the system has
the following features:
One Serial Port
One Parallel Port
One VGA Port
Two PS/2 Ports
Two USB Connectors