User`s guide

External Monitor Chapter Six - Optional Accessories
82
2. After you connect a peripheral device to the serial port, secure the two small
screws on the connector.
N
OTE
: You cannot use the touch pad and a serial mouse at the same time. In order to
use a serial mouse, first disable the touch pad, then enable and configure the
mouse as specified by the manufacturer. Please refer to the ”Hot Key Controls”
section in ”Chapter Two - System Features” , and the Internal PS/2 device section
in ”Chapter Three - Running BIOS Setup.” If you wish to run a PS/2 keyboard and
mouse at the same time, please contact Micron for a splitter cable.
External Monitor
You can connect a TV monitor to the TREK 2’s S-Video port and view the TREK
2’s video output. The TV Out port accommodates a Mini DIN type connector. To
connect the external monitor:
1. Plug the monitor’s power cable into a wall outlet.
2. Before you turn on the monitor, turn on your computer and use the System
Setup to designate the screen(s) that you want to use.