User`s guide

Exit Menu Chapter Three - Running BIOS Setup
63
Once this option is selected, the Setup program displays the following message:
Select Yes to save changes and exit the BIOS setup program or press [Esc] to
return to the Exit menu. The next time you boot up the TREK
2, the BIOS will
attempt to load the values you saved in non-volatile memory. If these values
cause the system boot to fail, reboot and press [F2] to enter the Setup program.
Once in Setup, you can try to change the values that caused the system boot to
fail. If the problem persists, load the default values.
N
OTE
:
If you attempt to exit the Setup program without saving your changes, the
program will prompt you with a message asking if you want to save your changes
before exiting.
Exit Discarding Changes
This option should only be used if you do not want to save the changes you have
made to the Setup program. If you have made changes to the fields other than
system date, system time, and password, the system will ask for confirmation
when choosing Exit Discarding Changes.
Select Yes to save changes and exit the BIOS setup program, select No to exit
BIOS without saving your changes, or press [Esc] to return to the Exit menu.
Load Setup Defaults
Use this option to load the default values for each of the parameters on the Setup
menus. When this option is selected, the following message is displayed:
Save configuration changes and exit now?
[Yes] [N o]
Setup Configuration
Configuration has not been saved!
Save before exiting?
[Y es] [N o]
Setu
p
Confi
g
uration
Load default configuration now?
[Yes] [N o]
Setup Configuration