User`s guide

Exit Menu Chapter Three - Running BIOS Setup
62
Boot Device Priority
Use the up and down arrows to select the boot device. Then press either the plus
key [+] to move the device up the list or the minus key [-] to move the device down
the list. After you have made your changes to the boot device priority menu, press
[Esc] to exit to the boot menu.
Exit Menu
Once you have made all of your selections from the various menus in the Setup
program, you should save your changes and exit Setup. Select
Exit
from the
menu bar to display the following menu.
N
OTE
: Pressing the [Esc] key does not exit this menu. You must select one of the options
or a menu bar item to exit.
Exit Saving Changes
Once you are finished making your selections, choose this option from the exit
menu to ensure the values you selected are saved to non-volatile RAM. Changes
you made to the Setup program must be changed to non-volatile RAM in order to
make them operative. Non-volatile RAM is sustained by an on-board battery even
when the TREK
2 is turned off.
Main Advanced Securit
y
Power Boot Exit
PheonixBIOS Setup Utilit
y
Item Specific Help
F1 Help Select Item -/+ Chan
g
e Value F9 Setup Defaults
Esc Exit Select Menu Enter Select Sub-Menu F10 Save and Exit
Exit System Setup and
save your changes to
CMOS.
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Discard Changes
Save Changes
Exit