User`s guide

Boot Menu Chapter Three - Running BIOS Setup
61
Resume On Time
Use this option to enable the system to resume at specific time. The possible
options are:
•
Off (default value)
•
On
If you set this field to ON, you must also set the
Resume Time
field.
Resume Time
Use this option to specify the time the system will resume. The
Resume On Time
field must be set to on for the settings in this field to function. Enter the time in
hours, minutes and seconds in a 24-hour format. For example, indicate that the
system should resume normal operation at 1:00 PM by setting this field with a
value of 13:00 hours.
Boot Menu
The
Boot
menu allows the user to specify the order in which the TREK 2 is to
check for a device to boot the system. You can also configure the way that the
system will boot up. To make changes, select
Boot
from the menu bar.
Main Advanced Securit
y
Power Boot Exit
PheonixBIOS Setup Utilit
y
Item Specific Help
F1 Help Select Item -/+ Chan
g
e Value F9 Setup Defaults
Esc Exit Select Menu Enter Select Sub-M enu F10 Save and Exit
Use < > or < > to
select a device, then
press <+> to move it up
the list, or <-> to
move it down the list.
Press <Esc> to exit
this m enu.
1. [Removable Devices]
2. [Hard Drive]
3. [ATAPI CD -RO M Drive]
4. [Boot to Network]
Hard Drive
Boot