User`s guide

Power Menu Chapter Three - Running BIOS Setup
59
If this menu item is set to Disabled, power management features will not function
regardless of other field settings on the Power menu. Use the Customized option
to make your selections from the fields within the Power menu.
When set to Maximum Power Savings, system power will be conserved to its
greatest amount. The remaining fields within the Power menu will be set to
predefined values that ensure maximum power savings.
When this field is specified as Maximum Performance, best system performance
is achieved with some power conservation. The remaining fields within the Power
menu will be set to pre-defined values that ensure maximum power savings.
Standby Timeout
Use this field to specify how much time of inactivity must elapse before the system
automatically transits to standby mode. In standby mode all devices are powered
off and the system enters a low power CPU state. Available options for this field
are:
•
Disabled
•
1 Minute
•
2 Minutes
•
4 Minutes
•
6 Minutes
•
8 Minutes (default value)
•
12 Minutes
•
16 Minutes
If APM is installed, this function will be controlled by APM and may function
differently depending on the APM settings.
Suspend Mode
This field determines whether the TREK 2 will save its CPU status and Suspend to
its lowest power consumption mode or Suspend to disk and power off. Available
options for this field are:
•
Suspend (default value)
•
Save To Disk
Auto Suspend Timeout
This field determines how much system idle time must pass before the system
enters Suspend mode. When set to Off, the system cannot enter Suspend mode