User`s guide

Power Menu Chapter Three - Running BIOS Setup
58
Power Menu
Use the
Power
menu of the Setup program to enable and adjust the TREK 2’s
advanced power saving features. Enabling these features will extend the life of
the battery pack between charges. To make changes to power management
settings, select
Power
from the menu bar. The following menu appear.
PM Control
Use this field to choose the
Power Management
mode. You can set
Power
Management
to operate at all times or only when you are using battery power.
The options for this field are:
•
Always
•
Battery powered only (default value)
Power Savings
This option must be enabled to use any of the automatic power saving features.
The options for this field are:
•
Disabled
•
Customized (default value)
•
Maximum Power Savings
•
Maximum Performance
M ain Advanced Securit
y
Power Boot Exit
PheonixBIOS Setup Utilit
y
Item Specific Help
F1 Help Select Item -/+ Chan
g
e V alue F9 Setup Defaults
Esc Exit Select Menu Enter Select Sub-Menu F10 Save and Exit
Select 'Always'
the Power Management
function will operate
at all times.
Select 'Battery Powered
Only'
the Power Management
function to operate
only when you are
using battery powered.
PM Control:
[Battery Powered Only]
Power Savings:
[Customized]
Standby Timeout:
[8 Minutes]
Auto Suspend Timeout:
[10 Minutes]
Suspend Mode:
[ Suspend]
CPU Doze Mode:
[Off]
Hard Disk Timeout:
[4 Minutes]
Battery Low Suspend:
[Enabled]
Resume On Time:
[Off]
resume Time:
[00:00:00]
Power