User`s guide

Advanced Menu Chapter Three - Running BIOS Setup
53
Integrated Peripherals
Pressing the [Enter] key when this field is highlighted calls up the following
submenu.
Use this menu to configure the TREK2’s serial and parallel ports.
Serial Port A
Use this field to configure the TREK 2’s serial COM1 port. The following options
are available.
•
Auto
•
Disabled
•
Enabled (default value)
Base I/O Address
When enabled is selected, the base I/O address menu item appears. When the
Serial Port A field is set to Enabled, the “Base I/O Address” field becomes
available and you can set the serial port’s IRQ and I/O address. The following
options are available:
•
3F8, IRQ 4 (default value)
•
2F8, IRQ 3
•
3E8, IRQ 4
•
2E8, IRQ 3
Main Advanced Securit
y
Power Boot Exit
PheonixBIOS Setup Utilit
y
Item Specific Help
F1 Help Select Item -/+ Chan
g
e Value F9 Setup Defaults
Esc Exit Select M enu Enter Select Sub-Menu F10 Save and Exit
Configures Serial port A
using options:
[Disabled]
No configuration
[Enabled]
User configurations
[Auto]
BIOS or OS chooses
configuration
(O S Controlled )
Displayed when
controlled by OS
Serial port A: [Enabled]
Base I/O address: [3F8 IRQ 4]
Serial port B: [Enabled]
Base I/O address: [2F8 IRQ 3]
Mode: [SIR]
Parallel port: [Enabled]
Mode: [Bi-directional]
Base I/O address: [378/IRQ7]
Advanced
Inte
g
rated Peripherals