User`s guide

Main Menu Chapter Three - Running BIOS Setup
50
•
Fast PIO 3
•
Fast PIO 4 (default value)
Ultra DMA Mode
When enabled, this option speeds up data transfer to and from the drive. In order
to make changes to this field, the
Type
field must be set to
User
. Set the
Type
field to
Auto
to provide the optimum transfer mode.
Configuration options are:
•
Disabled (default value)
•
Mode 0
•
Mode 1
•
Mode 2
After using the legend keys to make changes to this submenu, press the [Esc] key
to exit back to the
Main
menu.
Primary Slave
The number value in this field indicates the size of your TREK 2’s Primary Slave
Hard Drive. The arrow head icon indicates that this field contains a submenu. The
submenu is used to configure an IDE Hard Disk installed in the system.
To configure a hard disk drive, move the cursor to highlight the
Primary Slave
field, and press the [Enter] key. The
Primary Slave
submenu screen will appear.
When a Slave HDD is installed, the fields and options on this submenu will be the
same as the IDE Adapter 0 Master submenu described on page 47. After using
the legend keys to make changes to this submenu, press the [Esc] key to exit
back to the
Main
menu.
IDE Adapter 1 Master
The value in this field indicates the size of your TREK 2’s IDE Adapter 1 Master
Hard Drive or the presence of a CD-ROM or DVD drive. The submenu is used to
configure an IDE Hard Disk or CD-ROM/DVD installed in the system.
To configure a hard disk drive or CD-ROM/DVD, move the cursor to highlight the
IDE Adapter 1 Master
field, and press the [Enter] key. The I
DE Adapter 1
Master
submenu screen will appear. When the
Type
field is set to
Auto
or
CD-
ROM
, only the
32 Bit I/O
and
Ultra DMA Mode
fields are available. When set to
User
the fields and options on this submenu are the same as the
IDE Adapter 0
Master
submenu described on page 47.
After using the legend keys to make your selections to this submenu, press the
[Esc] key to exit back to the
Main
menu.