User`s guide

Main Menu Chapter Three - Running BIOS Setup
47
IDE Adapter 0 Master
This field is used to configure the IDE Hard Disk installed in the system. To
configure a hard disk drive, move the cursor to highlight the IDE Adapter 0 Master
field
IDE Adapter 0 Master [XXXX MB]
.
Pressing the [Enter] key at this point will reveal the IDE Adapter 0 Master
submenu.
N
OTE
: Before configuring a hard disk drive, have the configuration information supplied
by the hard drive’s manufacturer. Incorrect settings can keep your system from
recognizing the hard disk.
The following options are available for this field:
•
Auto (default value)
•
None
•
CD-ROM
•
User
•
IDE Removable
•
ATAPI Removable
M ain Advanced Securit
y
Power Boot Exit
PheonixBIOS Setup Utilit
y
Item Specific Help
F1 Help Select Item -/+ Chan
g
e V alue F9 Setup Defaults
Esc Exit Select Menu Enter Select Sub-Menu F10 Save and Exit
Type: [Auto]
CHS Format:
Cylinders: [16383]
Heads: [15]
Sectors: [63]
Maximum Capacity: 7927MB
LBA Format:
Total Sectors: 19640880
Maximum Capacity: 10056MB
Multi-Sector Transfers: [16 Sectors]
LBA Mode Control: [Enabled]
32 Bit I/O:
[Enabled]
Transfer Mode: [Fast PIO 4]
Ultra DMA Mode: [Mode 2]
Main
Auto = autotypes
hard-disk types
installed there.
CD-ROM = a CD-ROM
drive is installed here.
IDE/ATAPI Removable =
removable disk drive is
installed here.