User`s guide

About BIOS Setup Chapter Three - Running BIOS Setup
44
You should run the Setup program under the following conditions:
•
You have set up the computer for the first time and you get a message
prompting you to run the BIOS Setup program
•
You want to configure the TREK 2 to use a different booting device
•
You want to reset the system clock
N
OTE
: The above items are only a few examples and are by no means a complete list.
Legend Bar
At the bottom of the Setup screen you will notice a legend bar. Use the keys in the
legend bar to navigate through the various setup menus.
Accessing the BIOS Setup
Program
To access the BIOS Setup program, press the [F2] key after the TREK 2 logo has
screen or CRT.
Item Specific Help
On the right side of the Setup screen is an area labeled
Item Specific Help
. This
area will list navigation key shortcuts and information that is specific for the item
that you are currently editing.
Menu Bar
The top of the screen has a menu bar with these suggestions:
Main
: Make changes to the basic system configuration.
Advanced:
Use this menu to enable and make changes to the advanced features
available on your system, such as enabling FIR.
Security:
Use this menu to set a password. The password enables bootup and
controls access to the BIOS setup.
Power:
Use this menu to configure and enable Power Management features.
Boot
: Use this menu to configure the default system device used to locate and
load the Operating System.
Launching Submenus
Note that a right pointer symbol appears to the left of certain fields. This pointer
indicates that a submenu can be launched from this field. A submenu contains
additional options for a field parameter. To call up a submenu, simply move the
cursor to highlight the field and press the [Enter] key.