User`s guide

Section 8 - Result Codes Appendix D - Fax/Modem Information
159
EC* only appears when the extended result codes configuration
option is enabled. EC is required by one of the following symbols,
depending upon the error control method used:
•
V42bis-V.42 error control and V.42bis data compression.
•
V42-V.42 error control only.
•
MNP 5-MNP class 4 error control and MNP class 5 data compression
•
MNP 4-MNP class four error control only.
•
NoEC-No error control protocol.
CONNECT 24000 EC* 56 CONNECT 26400 EC* 57
CONENCT 28800 EC* 58 CONNECT 31200 EC* 59
CONNECT 33600 EC* 60 CONNECT 32000 EC* 70
CONNECT 34000 EC* 71 CONNECT 36000 EC* 72
CONNECT 38000 EC* 73 CONNECT 40000 EC* 74
CONNECT 42000 EC* 75 CONNECT 44000 EC* 76
CONNECT 46000 EC* 77 CONNECT 48000 EC* 78
CONNECT 50000 EC* 79 CONNECT 52000 EC* 80
CONNECT 54000 EC* 81 CONNECT 56000 EC* 82
CONNECT 58000 EC* 90 CONNECT 60000 EC* 84
DELAYED 88 BLACKLISTED 89
BLACKLIST FULL 90
Result Code Numeric Result Code Numeric
TABLE 18. Section 8 - Result Codes