User`s guide

Safety Instructions Appendix C - Safety Guidelines
150
14.DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT OR STORAGE
CONDITION WITH TEMPERATURES BELOW 20ºC (-4ºF) OR ABOVE 60ºC
(140ºF), IT MAY DAMAGE THE EQUIPMENT.
15.For battery safety, See “Chapter Five - Power Management” on page 71.
16.See ”Appendix B - Regulatory” for Fax Modem safety.
Safety Instructions
1. Unplug the TREK 2 from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
2. Do not press on or store any object on the LCD cover when it is closed since it
may cause the LCD to break.
3. Do not attempt to service the TREK 2 yourself. Unplug the TREK 2 from the
wall outlet and refer servicing to an authorized dealer.
4. When replacement of components is required, be sure to replace only with
components provided by the manufacturer. Unauthorized substitutions may
result in safety hazards.
Power Safety Instructions
1. This electronic device should be operated from the type of power source
indicated on the marking label. If you are not sure of the type of power
available, consult your dealer or local power company.
2. This computer is shipped with its own AC adapter. Do not use the computer
with a different adapter.
3. Do not allow anything to rest on the power cord. Do not place the TREK 2
where people will walk on the cord.
4. When you disconnect cords, remember to pull them by the plugs and not by
the cords themselves. This will prevent damage to the cords, plugs, ports, and
jacks.
5. If an extension cord is used with this TREK 2, make sure that the total ampere
ratings of the products plugged into the extension cord do not exceed the
extension cord ampere rating. Also, make sure that the total current of all
products plugged into the wall outlet does not exceed 15 amperes.
Battery Safety Instructions
1. Do not disassemble the battery. The chemicals inside can damage skin and
clothing.
2. Keep the battery pack away from fire.
3. Do
NOT
expose the battery to rain.