PRIME PR100 User Manual Revision: 1.00 Document Title PR100 User manual Version Finale Date Status 1.
Contents 1 Introduction....................................................................................................................................3 2 Product Overview ..........................................................................................................................3 2.1 Appearance..........................................................................................................................3 2.2 Buttons/Mini USB Interface Description ...............................
1 Introduction PR100 is a mobile phone which mainly is used for emergency dialing with GSM frequencies 850/900/1800/1900. Based on the embedded wireless protocol, PR100 can communicate with the backend server through GPRS/GSM network, and transfer reports of emergency, gsm information and scheduled power level etc… Service provider is easy to setup their processing platform based on the functional wireless protocol. 2 Product Overview 2.1 Appearance Figure 1-1 2.
Mini USB interface Reset Key Connect a 5V DC adapter can power on PR100 and charge the internal battery. Backend server developer or administrator can use the data cable to configure PR100. Click the key will turn off internal VBAT when OS is abnormal, and then press Power Key to restart PR100. 2.3 LED Description Figure 1-2 There are red and blue LED lights in PR100 device, the description as following.
3 Getting Started 3.1 Parts List Name Picture Remark PR100 device The GSM/GPRS phone. AC-DC Power Adapter It is used to charge the internal battery of PR100. PR100 Data and charger Cable It is the USB data cable which can be used for firmware upgrading and configuration. It also includes the charger interface on the PR100. 3.2 Battery Charging The following items are suggestion for battery charge, please pay more attention. Please connect AC-DC power adapter with PR100 device.
charging at the same time. Figure 2-1 3.4 How to insert SIM Card Figure 2-2 Step1: Screw off and pull out the cover of SIM card. Step2: insert the SIM card into the slot of the device according to the direction as shown. Step3: push the cover back.
3.5 Power on/Power off Figure 2-3 Power on: Press the Power key at least 3 seconds and release it to power on PR100 device. Note that, the LED light will be solid red and solid blue. Power off: Power off is automated whilst 5 minutes later after the call. 3.6 Calls To make a call or answer a call, press the Power key once, the call can also be hung up by pressing the Power key. Note1: Be sure that the PR100 device is powered on before a call.
4 Trouble shooting and Safety info 4.1 Trouble shooting Trouble Messages can’t be reported to the backend server by GPRS. Possible Reason Solution The SIM card in PR100 doesn’t support GPRS. Try a GPRS supported SIM card. APN is wrong. Some APN can not visit the internet directly. Ask the network operator for the right APN. The IP address or port of the backend server is wrong. Make sure the IP address for the backend server is an identified address in the internet. 4.
