Manualshelf

User`s guide

ManualsBrandsMicron Electronics ManualsComputer equipmentNetFRAME LV2000
81828384858687888990
Micron Electronics, Inc. 3-45
Chapter 3: Configuring the System
Extended BIOS Translation for DOS Drives > 1 GB—when Enabled, drives
handled by the AIC-7880 BIOS can use extended translation (255 heads,
63 sectors per track) if their formatted capacity is greater than 1 GB and standard
translation if smaller than 1 GB.
CAUTION, before changing option, back up hard disks!
First back up the hard disks if you need to change this setting and the
translation scheme! All data is erased when you change from one
translation scheme to another.
Display <Ctrl-A> Message During BIOS Initialization—if Enabled, at boot
time a prompt displays to let you run the SCSISelect program.
Multiple LUN Support—the default setting is Disabled. Enable the option if
any devices have multiple logical units.
BIOS Support for Bootable CD-ROM—when enabled, the system can boot
from a CD-ROM. The option displays only if the adapter BIOS is configured
to include it. To boot from a hard drive or other device, either disable this
option or make sure there is no bootable CD in the drive.
BIOS Support for Int 13 Extensions—when enabled, the adapter BIOS
supports Int 13h extensions, required for bootable CD-ROMs. The option
displays only if the adapter BIOS is configured to include bootable CD-ROM
support. You can disable the option if the boot device is not a CD-ROM, but it
does no harm to leave it enabled.
Support for UltraSCSI Speed—the default setting is Disabled. The option
displays only if the BIOS is configured to support UltraSCSI speeds. Enable
the option to use UltraSCSI speeds with the AIC-7880.
SCSI Disk Utilities Menu, SCSI
Select
When you select SCSI Disk Utilities from the SCSISelect Main Menu, the utility
scans the SCSI bus for connected devices and lists the SCSI IDs and associated
devices on the bus.
From the list of devices, select the one you want to format or verify.
If a device has multiple logical units, a menu of LUNs appears.
Select the device you want to format or verify. A small menu appears. Select
Format Disk or Verify Disk.