User`s guide
Micron Electronics, Inc. 3-43
Chapter 3: Configuring the System
Do not enable the Send Start Unit option before checking...
Make sure the AIC-7880 BIOS option is enabled (see Advanced
Configuration Options).
Check the manual that comes with your SCSI device to make sure the
device supports the command. If so, it is likely that you will need to
change a switch or jumper setting on the device so it can respond to
the command.
Advanced Configuration Options, SCSI
Select
Feature Default Choices
If you disable the Host Adapter BIOS option, the following options have no effect.
Host Adapter BIOS (Configuration Enabled
Utility Reserves BIOS Space)
Support Removable Disks Under Boot Only
BIOS as Fixed Disks
Extended BIOS Translation for DOS Enabled
Drives greater than 1 GB
Display <Ctrl-A> Message During Enabled
BIOS Initialization
Multiple LUN Support Disabled Enabled/Disable
BIOS Support for Bootable CD-ROM Enabled Enable/Disable
BIOS Support for Int13 Extensions Enabled Enable/Disable
Support for Ultra SCSI Speed Enabled Enable/Disable
CAUTION, understand the options before changing defaults
Do not change the default settings in the SCSISelect Advanced
Configuration Options menu without understanding the
consequences of making changes.
Enable/Disable
Boot Only
All Disks
Disable
Enable/Disable
Enable/Disable