User`s guide

Micron Electronics, Inc. 3-41
Chapter 3: Configuring the System
Boot Device Options, SCSI Select
Feature Option Comment
Boot Target ID 0-15
Boot LUN Number 0-7
Boot Target ID—The default boot device is the device at SCSI ID 0 with logical
unit number (LUN) 0. To specify a different boot device, choose a different
SCSI ID (0 through 7 on 8-bit adapters, 0 through 15 on 16-bit adapters).
Boot LUN Number—If the boot device has multiple logical units, you must
also specify the boot logical unit number (LUN). This can be 0 through 7 (on
8-bit or 16-bit adapters). Multiple LUN support can be disabled in the SCSISelect
Advanced Configuration menu.
The default boot device is at SCSI ID 0 with
logical unit number (LUN) 0. To specify a
different boot device, choose a different SCSI
ID (0 through 7 on 8-bit adapters, 0 through 15
on 16-bit adapters).
The logical unit number (LUN) can be 0
through 7 (on 8-bit or 16-bit adapters).
If you disable Multiple LUN Support in the
Advanced Configuration menu, specifying a
number here has no effect.
SCSI Device Configuration, SCSI Select
The screen shows five features that can be configured independently for each
of up to 15 devices (SCSI Device ID #0 through #15)
Feature Default Choices
Initiate Sync Negotiation Yes
Maximum Sync Transfer Rate 40.0 for 16-bit
20.0 for 8-bit
Enable Disconnection Yes
Initiate Wide Negotiation Yes
Send Start Unit Command Yes
Yes/No
16-bit devices: 20.0, 26.8, 32.0, 40.0
8-bit devices: 10, 13.4, 16.0, 20.0
Yes/No
Yes/No
Yes/No
No effect if the BIOS is disabled.