User`s guide

Micron Electronics, Inc. 3-39
Chapter 3: Configuring the System
Main Menu, SCSI Select
The main SCSISelect menu shows the name of the host adapter and its address:
<Host adapter> at Bus:Device xx:xxh. There are two menu options.
Options Comment
Configure/View Host
Adapter Settings
SCSI Disk Utilities
Press <Enter> to display the Configuration menu.
Press <Enter> to display the SCSI Disk Utilities menu.
The utility scans for all SCSI devices installed in the
system and lists them. Press <Enter> to select the device
you want to run utilities on.
The default ID for the SCSI host adapter is #7. If you
select the host adapter, you will see only a message stating
that fact; you cannot specify any options for the host
adapter from the utilities menu.
Configuration Menu, SCSI Select
Feature Default Choices
SCSI Bus Interface Definitions
Host Adapter SCSI ID 7
SCSI Parity Checking Enabled
Host Adapter SCSI Low ON/High
Termination ON
Additional Options
Boot Device Options Press <Enter>
SCSI Device Configuration Press <Enter>
Advanced Configuration Press <Enter>
Options
0 - 15
Enable/Disable
Low ON/High ON
Low OFF/High OFF
Low OFF/High On
See Boot Device Options, SCSISelect.
See SCSI Device Configuration,
SCSISelect.
See Advanced Configuration
Options, SCSISelect.