User`s guide

3-38 Micron Electronics, Inc.
Micron NetFRAME LV2000 Server System User’s Guide
Using SCSI Select
The SCSISelect utility detects the number of AIC-7880 wide/fast-20 SCSI III
host adapters in the system. Use the utility to:
• Change default values
• Check or change SCSI device settings that may conflict with those
of other devices in the system
• Perform a low-level format on SCSI devices installed in the system
How to Enter and Start SCSISelect
1. Turn on your video monitor and system. After a few seconds
POST begins to run. After the memory tests are completed, if
you do not choose to enter Setup and you do have an operating
system installed, a SCSISelect prompt will appear. Record your
settings.
Press <Ctrl><A> for SCSISelect(TM) Utility!
2. Press <Ctrl+A> to run the utility. SCSISelect has these menus:
1. Main Menu
• Configuration
- Boot Device Configuration
- SCSI Device Configuration
- Advanced Configuration Options
• SCSI Disk Utilities
2. Exit Menu
To navigate the menus: Press
Exit a menu or the utility <Esc>
Select an item <Enter>
Go to previous item Up arrow
Go to next item Down arrow
Reset to host adapter defaults <F6>