User`s guide

Micron Electronics, Inc. 3-37
Chapter 3: Configuring the System
Exit Menu
You can make the following selections on the Exit Menu. Select an option
using the up or down arrow keys, then press <Enter> to execute the option.
Pressing <Esc> does not exit this menu. You must select one of the items from
the menu or menu bar to exit.
Choices Description
Exit Saving Changes Exits after writing all modified Setup item values to
NVRAM.
Exit Discarding Changes Exits leaving NVRAM unmodified.
Load Setup Defaults Loads values of all Setup items from previously saved
custom defaults.
Load Custom Defaults Loads default values for all Setup items.
Save Custom Defaults Saves present Setup values to custom defaults.
Discard Changes Reads previous values of all Setup items from NVRAM.
Save Changes Writes all Setup item values to NVRAM.