User`s guide

Micron Electronics, Inc. 3-31
Chapter 3: Configuring the System
Security Menu
You can make the following selections on the Security Menu itself. Enabling
the Supervisor Password field requires a password for entering Setup. The
passwords are not case sensitive.
Feature Choices Description
Administrator Password is Clear
User Password is Clear
Set Administrative Password Press Enter
Set User Password Press Enter
Password on Boot Disabled
Enabled
Diskette Access Administrator
User
Fixed Disk Boot Sector Normal
Write Protect
System Backup Reminder Disabled
Daily
Weekly
Monthly
Status only; user cannot modify.
Status only; user cannot modify.
Once set, this can be disabled by
setting it to a null string, or by
clearing password jumper on system
board (see System Board Jumpers in
Chapter 2).
When the <Enter> key is pressed,
the user is prompted for a password;
press ESC key to abort. Once set, this
can be disabled by setting it to a null
string, or by clearing password
jumper on system board (see System
Board Jumpers in Chapter 2).
When the <Enter> key is pressed,
the user is prompted for a password;
press ESC key to abort. Once set, this
can be disabled by setting it to a null
string, or by clearing password
jumper on system board (see System
Board Jumpers in Chapter 2).
Requires password entry before
boot. System will remain in secure
mode until password is entered.
Password on Boot takes precedence
over Secure Mode Boot.
Controls access to diskette drives.
Write-protects boot sector on hard
disk to protect against viruses.
Displays reminder message at boot.