User`s guide

1-2 Micron Electronics, Inc.
Micron NetFRAME LV2000 Server System User’s Guide
Unpacking
Check the Packaging
As soon as the packages containing your new system arrive, carefully inspect
them for any signs of damage. In particular, look for wrinkled or bent corners,
holes, or other signs of bad handling or abuse. If you notice any damage to the
packaging, immediately open the boxes and inspect the contents for damage.
Pay close attention to the components near the area where the packing material
was damaged.
Unpack Your System
Caution: If your system arrives in cold weather, do not unpack the computer
or the monitor until they have been allowed to come to room temperature.
Immediately exposing them to the warm room may cause condensation to
occur, which may damage the units. If condensation does occur, allow the
units to completely dry before operating them.
Follow these steps after you have determined that the packaging is undamaged:
1. Taking care not to damage the packing material, carefully open
the cardboard box containing the computer and remove the
system unit, keyboard and any other accessories that you may
have ordered.
2. Carefully unpack the monitor and all accessories from the
monitor package. Be careful not to damage the packing material.
3. Inspect all items for damage that may have occurred during
shipment.
For your protection, report any damage to the shipper
immediately.
We highly recommend that you save the packaging in the event that you need
to move or ship the system some time in the future.
Check Your Packing List
Now that you have everything out of the packages, take the time to check the
packing list to be sure you received everything. If you discover that an item is
missing, call Micron Electronics, Inc. immediately to receive a replacement.
Refer to Appendix A for contact information.