LTE Tracker Bolt 4GV User Manual Revision: 1.00 Document Title Bolt 4GV User manual Version 1.
Contents 1 Introduction .................................................................................................................................... 3 2 Product Overview .......................................................................................................................... 3 2.1 Appearance .......................................................................................................................... 3 2.2 Buttons/USB Interface Description................................
1 Introduction Bolt 4GV is a powerful GPS locator which is designed for vehicle and assets tracking. It works on LTE CATM1 with superior receiving sensitivity. Its location can be real time or schedule tracked by back-end server or specified terminals.
2.3 LED Description Figure 1-2 There are four LED lights in Prime Bolt 4GV device, the description as following. Light LTE LED Power LED Event State Power on Slow flash (blue) Power on and normal Fully charged In charging The charger plug in to power on the device Dark Slow flash (green) Slow flash (red) Solid (White) 3 Getting Started 3.
Bolt 4GV Locater The LTE/GPS locator. Bolt 4GV charger It used to be charging for the Bolt 4GV. 3.2 Battery Charging The following items are suggestion for battery charge, please pay more attention. During the charging process, the Power LED light will slow flash. When the battery is fully charged, the Power LED light will be Ever-dark. You can charge the battery using charging dock which connects Bolt 4GV device with the Adapter. Charging will last about 5 hours.
3.4 Power on/Power off Figure 2-2 Power on: The Bolt 4GV can only be powered on by a charger plug in.. Power off: Press the Reset key , the device will turn off immediately. Once turned on, the charger can be unplugged. The follow-up is to rely on the battery to maintain work. 4 Frequency LTE: CATM1 GPS: 1575.42MHz WIFI: 2.4GHz SRD: 433.5MHz 4.1 WIFI The WIFI function of device only used for WIFI MAC address searching and report. 4.2 433 433 function is used to assist positioning system 4.
5 Trouble shooting and Safety info 5.1 Trouble shooting Trouble Possible Reason Solution Messages can’t be reported to the backend server by Mobile network. APN is wrong. Some APN can not visit the internet directly. Ask the network operator for the right APN. The IP address or port of the backend server is wrong. Make sure the IP address for the backend server is an identified address in the internet. Unable to power off Bolt 4GV. The function of power key was disabled by AT+GTFKS.
§ 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. § 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
