User's Manual

4
Function
Button
Geo-Fence mode
Long press the key to enable/disable Geo-Fence ID0
Geo-Fence in current position mode
Long press the key to enable/disable Geo-Fence ID0. If enable Geo-Fence
ID0, using the current position as the centre of Geo-Fence 0.
SOS mode (default)
Long press the key to active SOS alarm
12PIN
interface(USB
port)
Connect a 5V DC adapter can power on Prime One X and charge the internal
battery
Connect a 3.7V Li-ion or Li-Polymer battery can power on Prime One X
Backend server developer or administrator can use the data cable to configure
Prime One X (by RD or engineer not by end user).
Reset Button
Click the key will turn off internal VBAT when OS is abnormal, and then
press Power Key to restart Prime One X.
2.3 LED Description
Figure 2-2
There are four LED lights in Prime One X device, the description as following.
Light
Event
State
GPS LED
GPS fixed
Fast flash
GPS has been turned off
Dark
CDMA
LED(3G)
Power on and normal
Slow flash
Power off
Dark
WIFI LED
WIFI on
Slow flash
WIFI off
Dark
Power LED
Power on and normal
Dark
Fully charged
Solid
In charging
Slow flash