Software Instruction Manual

Application Builder
CONFIGURATION
Table 5-2. Status Commands (Cont’d)
Command Description R/W Info
CLR_Q Clear event queue W SE1,CLRQCMD 1
ACK_ALL Ack all diagnostics, PA alarms and NM msgs W SE1,GLBACK 1
ACK_DIAGS Ack all diagnostics W SE1,DGACK 1
ACK_ALMS Ack all PA alarms W SE1,PAACK 1
R TIME
R DATE
R DAY
Read instrument time of day (Time includes
Date and Day or they can issued separately)
Read instrument calendar date
Read instrument day of week
R IF1,TIMEDAY
R IF1,DATE
R IF1,DAY
R IOLOCK Read instrument I/O Lock status R IF1,IOLOCK
R COMMLOCK Read instrument communication lock status R IF1,COMMLOCK
R STATE Read instrument state R IF1,INSTATE
R XTIMES Read execution times R IF1 of attributes:
INT1-9, XTIME1-9,
FTIME1-9, MTIME1-9,
SCANTIME,IDLETIME
W TIME
data Write instrument time of day W IF1,TIMEDAY data
W DATE data Write instrument calendar date W IF1,DATE data
W DAY data Write instrument day of week W IF1,DAY data
W IOLOCK data Write instrument I/O Lock status W IF1,IOLOCK data
W COMMLOCK data Write instrument communication lock status W IF1,COMMLOCK
data
W STATE data Write instrument state W IF1,NXTISTAT data
R FG Read Minimum Foreground (Link message)
R FGO
lsp Read Foreground offset of attribute (Link message)
R BLOCK
blkocc# Read block and display bytes in hex (Link message)
R VERSION
1
Read instrument version (Link message)
R Q
2
Read instrument event queue (Link message)
R SD
type
3
Read instrument shutdown area type (Link message)
R DIAGS
type
4
Read specified instrument diagnostic type (Link message)
R
lsp Read specified attribute block,attribute
R lsp type
5
Read Byte Before attribute block,attribute
RS lsp Read specified string attribute (RS IF1,USRTAG) block,attribute
RS lsp type
5
Read Byte Before string attribute (RS EX1,13 H) block,attribute
W lsp data Write specified attribute block,attribute
W lsp data type
5
Write Byte Before attribute block,attribute
ACK blkocc# diag#
6
acknowledge diagnostic point (e.g. ACK IF1 9) (Link message)
5-23